Garland G18-BRL User Manual download pdf (Page 7)

Part # 4525958 (05/15/09) Page 7

Unpacking

GARLAND strongly recommends this unit be inspected for

possible freight damage while carrier driver is on site.

1. Remove carton. In case of damage, all packing materials

must be retained for carrier inspection.

2. Carefully inspect the broiler for any physical signs of

damage, such as scratches, dents and missing knobs.

3. With carrier driver on your site, note damage on freight

bill. Call carrier for inspection.

If you are checking equipment after carrier has departed,

you have approximately fteen (15) days to request a freight

damage inspection be made by the carrier’s agent.

If concealed damage claim is led with carrier beyond 15

days, GARLAND cannot be held responsible and carrier will

make it incumbent upon the consignee to oer reasonable

evidence that the carrier was at fault.

Safety Information

WARNING: Accessible parts may become hot during use.

Young children should be kept away.

This appliance is for professional use and should only be

used by qualied personnel.

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

PRE INSTALLATION

INSTALLATION

When corresponding with the factory or your local

authorized factory service center regarding service problems

or replacement parts, be sure to refer to the particular unit

by the correct model number (including the prex and sux

letters and numbers) and the warranty serial number. The

rating plate axed to the unit contains this information.

We suggest installation, maintenance, and repairs should be

performed by your local authorized service agency listed in

your information manual pamphlet.

In the event you have any questions concerning the

installation, use, care or service of the product, write or call

our Product Service Department.

This product must be installed by professional personnel as

specied. Garland/U.S. Range products are not approved or

authorized for home or residential use, but are intended for

commercial applications only. Garland / U.S. Range will not

provide service, warranty, maintenance, or support of any

kind other than in commercial applications.

Rating Plate Location

The rating plate is located by removing the grease tray, it is

located on left hand side grease slide support.

Statutory Regulations

Installation must be carried out by a competent person and

in accordance with the relevant regulations, codes of practice

and the related publications of the country of destination.

In European countries, installation must be carried out by

a competent person and in accordance with the relevant

regulations, codes of practice and the related publications of

the country of destination.

In The United States of America, the installation must

conform to the National Fuel Gas Code ANSI Z223.1, or latest

edition, NFPA No.54 - latest edition/or local code to assure

safe and ecient operation. In Canada, the installation must

comply with CSA B149.1 and local codes.

Australia Specic Regulation

This appliance must be installed in accordance with the

manufacturer’s instructions, local gas tting regulations and

requirements of AS 5601/AG 601 installation code. All burner

adjustments and setting should be made by a qualied gas

technician.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Comments to this Manuals

No comments

Garland G18-BRL User Manual Page 7

Comments to this Manuals

Related products and manuals for Cookers Garland G18-BRL