Garland H280 User Manual download pdf (Page 15)

03/09/09 P/N 4523367 Page 15

16) Reinstall Door Springs

 Refer to Step 4 for door spring connections

 For the door hinge with no microswitch:

 Hook on one end of the spring to the hooks from the orifice bracket

 Place a screwdriver underneath the opposite end of the spring and pry upward to

hook that end onto the bell crank assembly.

Left: Setup screwdriver at end of spring underneath hook on bell crank assembly

Right: Screwdriver pried upward, locks spring into place

 Pry the bell crank assembly upward to hook on the oven door hinge link. This is the

same as the uninstalling procedure in Step 4

 For the door hinge with a microswitch:

 Install the spring and hook on the oven door hinge link using the same method as

outlined above

 Screw on the microswitch bracket. Ensure that the button on the microswitch is

pushed down once the bracket is screwed on. Any other position will break the

switch when the door is opened

Left: INCORRECT. Button is not depressed when bracket is screwed on

Right: Correct installation with depressed button.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

No comments

Garland H280 User Manual Page 15