P/N: 3073400 04/2001INSTALLATION AND OPERATINGINSTRUCTIONSFORECG SERIES ELECTRIC CHAINGRIDDLESTHIS MANUAL SHOULD BE HANDED TO THE EQUIPMENT OWNER AND
11Continuous improvement is a Garland policy; therefore specifications are subject to change without notice.MANUFACTURED BY: DISTRIBUTED BY:GARLAND CO
1GENERAL INFORMATION1. Damage Check: Check carton or crate for possible damages incurred in shipping. Aftercarefully examining, check for “Conceale
2DO NOT operate the product unless all service and access panels are in place and fastenedproperly.DO NOT attempt to repair or replace any part of thi
3Note: A means of disconnection from the supply having a contact separation of at least 3 mm inall poles must be incorporated in the fixed wiring.WAR
4COMBUSTIBLE WALLMINIMUM CLEARANCENON-COMBUSTIBLE WALLMINIMUM CLEARANCEALL MODELSmm ins mm insSIDES 152 6 152 6BACK 152 6 152 6INSTALLATION PROCEDUREG
5sticking of product. Never salt food over griddle since this will build up a gummy residue makingit difficult to clean.Avoid hitting the surface of t
6to prevent scratching. Wash a small area at a time and rinse the washed area with a clean spongedipped into a disinfectant and wipe dry with a soft c
73. Remove the grease drawer, empty and wash thoroughly with soap & water. Replace.CLEANING INSTRUCTIONS (FOR HEAVY BUILD UP)(After using cleaner
83. Do not use the griddle as a hot top. A large pan or pot will trap heat and can cause the griddleplate to warp.4. Do not overheat the griddle to
Comments to this Manuals